The iLivestock eWeigh is easy to use and works seamlessly with iLivestock software and hardware. The eWeigh can also be used in conjunction with other stick readers and the iLivestock app.

Press and hold down the 'On / Off' button to turn on the eWeigh. Once turned on the 'On / Off' light Indicator will flash red.

BlueTooth is permanently on when the eWeigh is turned on, so no further settings need to be addressed.

Simply screw in the left and right weigh bar cables to the corresponding cable connectors on the eWeigh.

You can work with both cables connected or just one, depending on your set-up.

You'll get an opportunity to address the settings of the weigh bars when the eWeigh is connected to the iLivestock app.

Your eWeigh will come with a plug and cable in order to charge from the mains.

Connect the cable to the plug and then screw the charge cable to the Power Cable Connector found at the bottom centre of the eWeigh.

Once plugged into charge the External Power Connected light indicator will go red. The eWeigh can also be used whilst plugged into charge.

To turn off the eWeigh press and hold down on the On/Off button until the red 'on' light goes off.

Related articles:

eWeigh Pairing & Setup

Weighing with eWeigh

Online: Use the chat icon in Admin on the app or bottom right on the web dashboard