Tru-Test XRS2/i or SRS2/i Stick Reader settings:
It is very important to ensure the stick reader is in the correct mode BEFORE pairing it with your device. If you know the stick reader is in the correct format, you can skip to the below and to the pairing sections.
From the main screen select 'Settings'
Then select 'Bluetooth'
Scroll down to 'Advanced' then select (shown below)
Make sure 'Connect Mode' is [Default]. If it is not, select it and change it.
Pairing to iOS device (iPhone/iPad):
Ensure your mobile device Bluetooth is 'on'
Go to 'Equipment Menu', then under 'My EID Readers' click 'Add device'
Tap 'Pair' next to the XRS2/i or SRS2/i, this will open the 'Accessory Picker', then select your 'Tru-Test' Reader!
When you open up iLivestock, the top bar will be blue to confirm you have the stick reader connected successfully, and the reader will now appear under 'My EID Readers'
Pairing on an Android device:
Go to 'Equipment Menu', then under 'My EID Readers' click 'Add device'
Tap 'Pair' next to the XRS2/i or SRS2/i, this will open your phone Bluetooth settings.
Click 'add new device', find the XRS2/SRS2 and tap on it to connect.
When you open up iLivestock, the top bar will be blue to confirm you have the stick reader connected successfully, and the reader will now appear under 'My EID Readers'.